1.2-2.0/min 8900m3/h Pulse Jet Dust Collector

product description

Industial dust collector is a small dust collector. It adopts cylindrical filter bag,own system fan, pulse jet ash removal mode, has high purification efficiency, good effect of ash removal, small resistance, filter bag long life, easy maintenance, and safe and reliable operation.

Widely used in metallurgy, building materials, machinery, chemical industry, mining, etc all kinds of process system of dust purification and recycling materials.

Two series of twelve specifications dust filter, each kind of specification can be divided into the standard with ash bucket A type and open flange type B (no ash bucket, applicable to warehouse top).

Techinal parameters

Note:

1. The net filtration area in the table refers to the filtration area when a room is cleaned. The total weight of the equipment does not include the weight of the insulation layer.
2. The gas consumption in the table refers to the situation of centralized gas supply in the factory. If a separate air compressor is set, the gas consumption in the table is multiplied by 1.3.


working principle

PPC series air box pulse bag filter consists of upper box body, middle box body, lower box and ash head, ladder, platform, gas storage tank, pulse valve, dragon frame, screw conveyor, ash unloading valve, electrical control cabinet, air The press and other components are made according to standards. The wiring position of the incoming terminal is set according to the user's requirements. For the wiring terminal, see the instruction manual of the electrical controller.
Under the action of the main fan of the system, the dust-containing gas enters the pre-collection chamber of the dust collector from the dust inlet of the PPC type air box pulse bag filter. The dust-containing gas flows into the ash hopper under the impact of the baffle, and the flow rate decreases at the same time. Slow, under the action of inertia and the weight of the dust, the coarser dust particles directly fall into the ash hopper and are discharged from the ash discharging mechanism, which plays a role of pre-collection. The clean gas after passing through the filter bag enters the upper box and flows into the air outlet and is discharged.
The body of the air box pulse bag filter is divided into several box areas, and there is a lifting penalty driven by a cylinder on the side outlet pipe of each box. When the filter bag of the air box pulse bag filter works for one cycle, the ash cleaning controller will send a signal, the poppet valve of the first box room starts to close and cut off the overflow gas, and the pulse valve of the box room opens to a value greater than 0.4Mpa. Compressed air rushes into the clean air chamber to clear the dust on the filter bag; when this action is completed, the poppet valve reopens, the box re-filters, and all the dust removal actions are completed according to the above procedures one by one.
Xinchen FMQD/PPC series air box pulse bag filter can provide users with different room numbers and different bag numbers PPC32, PPC64, PPC96, PPC128 and other specifications according to the user's different cleaning field conditions. You can choose according to the following parameter table. If you need technical support, you can call Xinchen service hotline: 0317-8046444. After explaining your cleaning site conditions and needs to our professional and technical personnel, we will provide free Provide you with a safer and reasonable dust removal solution

Equipment advantages

▲Control is more convenient
Adopt PLC program or special pulse controller to control the dust removal, and it can be timed and manually, which ensures the dust removal effect of the air compressor.
Timing description: set the time program to automatically clean the dust from room to room
Manual instructions: Automatic control is adopted during normal work. When a single machine fails, the manual control can be switched randomly to avoid changing the program and causing too much ash accumulation in the ash hopper, causing the auger to jam or causing the dust to accumulate in the pipeline, reducing the suction effect and causing the pipeline to block.
▲Lower cost
Separate chamber spraying and cleaning: One pulse valve can spray one chamber at the same time (the number of filter bags has 32, 64, 96 specifications series). Compared with ordinary dust collectors, one valve blows six bags, and the number of pulse valves is reduced by 6-20 times.

        Botou Xinchen Environmental Protection Equipment Co., Ltd. is a professional company integrating environmental engineering and environmental protection equipment research, design, production, installation and service. The company is located in the West Development Zone, Botou City, Hebei Province, in the center of Beijing, Tianjin, Jinan and Shijiazhuang. In addition, the Beijing-Shanghai Expressway, Beijing-Shanghai Railway, National Highway 106 and National Highway 104 run through the city, and the transportation is very convenient.

        Our company takes science and technology investment as the forerunner, guarantees excellent quality, and takes sophisticated equipment and advanced technology as the core. It is an environmentally friendly product development and production base integrating design, manufacturing, installation, commissioning and after-sales service. The company has a strong economy A strong, high-quality management team, with CAD work design and sales, financial computer management network, and electronic control automation equipment system. We always adhere to the tenet of survival by quality, development by quality, and benefit from quality. We are now in the domestic technological development and production base of high-end, high-quality, high-performance environmental protection equipment, and our production and sales are in the same industry across the country. Ranked among the best. The main technical products include: desulfurization, exhaust gas dust removal, garbage incineration and other environmental pollution treatment technologies and equipment. The products are widely used in metallurgy, electric power, building materials, chemical industries and other industries.

　　 Our company mainly produces: baghouse dust collector, boiler dust collector, cyclone dust collector, Cartridge Filter Dust Collector, Dust Collector Filter Bags, and can also be designed and modified according to user needs. The company has an installation and commissioning team of more than 100 people, which can undertake the installation and commissioning of equipment for large-scale environmental protection systems.

        With the development of society and the improvement of human awareness of the environment, our company has continuously introduced new technologies and developed dozens of new products on the basis of the original products, which meets the needs of the market. The company takes the investment in science and technology as the forerunner. With advanced equipment, excellent quality as the guarantee, high-quality and fast after-sales service has won the trust of our customers.

　　The development of an enterprise is inseparable from technology, talents, and users. We are willing to establish a stable, equal and mutually beneficial business relationship with customers all over the country, so that we can develop and prosper together and make greater contributions to the cause of environmental protection. The company regards quality as its life, and regards the actual interests of customers and its long-term development as one. Over the years, our company has done everything in a down-to-earth manner, and has won the trust of users step by step. We wholeheartedly serve the new and old users, and work with you to create brilliant! We strive for survival by quality and development by quality.

　　Our company has always established long-term friendly trade relations with customers at home and abroad on the basis of equality and mutual benefit. Warmly welcome Chinese and foreign customers to negotiate business with us!